1 |
IDENTIFICATION OF THE SUBSTANCE/PREPARATION
AND THE COMPANY/UNDERTAKING
Product
information
Trade
name: |
Nano Mould Release |
Company: |
BPI Technology (S) Pte Ltd
Blk 1057, Eunos Ave 3, #02-89, Singapore 409848 |
Telephone: |
(65) 6741 0711 |
Telefax: |
(65) 6234 4126 |
Usage: |
Permanent mould release surface coating |
|
2 |
COMPOSITION/INFORMATION ON INGREDIENTS
Chemical
nature:
Modified
Hybrid material in ethanol solution
Hazardous components:
|
Chemical Name |
CAS-Nr. |
|
Polysiloxane
10-30% |
556-67-2 |
|
Ethanol
|
64
– 17 - 5 |
|
3 |
HAZARDS IDENTIFICATION
Risk advice
to man and the environment:
Highly flammable
May cause long-term adverse effects in the aquatic environment.
Possible risk of impaired fertility. |
4 |
FIRST
AID MEASURES
Inhalation:
|
Move to fresh air. |
Skin
contact: |
Wash
off with soap and water. |
Eye
contact: |
Immediately
flush eye(s) with plenty of water. If eye irritation persists, consult
a apecialist. |
Ingestion: |
Do
not induce vomiting. Drink 1 or 2 glasses of water. Obtain medical
attention. |
|
5 |
FIRE-FIGHTING
MEASURES
Suitable extinguishing media : |
alcohol-resistant foam
carbon dioxide (CO2)
dry powder |
Special protective
equipment for fire-fighters : |
Wear
self contained breathing apparatus for fire fighting if necessary. |
Further
information : |
Standard
procedure for chemical fires. |
|
6 |
ACCIDENTAL RELEASE MEASURES
Personal
precautions: |
Use personal protective
equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Remove all sources of ignition. |
Methods for cleaning up: |
Soak up with inert absorbent material (e.g.
sand, silica gel, acid binder, universal binder, sawdust).
Shovel into suitable container for disposal. |
|
7 |
HANDLING AND STORAGE
Handling
Advice
on safe handling: |
Take
measures to prevent the build up of electrostatic charge.
Use only in well ventilated areas.
Wear personal protective equipment. |
Advice on protection
against fire and explosion: |
Keep away from sources of
ignation – No smoking.
Take precautionary measures against static discharges. |
Storage
Requirements
for storage
areas and containers : |
Keep in
an area equipped with solvent resistant flooring.
Keep containers tightly closed in a dry, cool and well-ventilated
place. |
Storage
temperature: |
< 30°C |
Other data: |
Stable under recommended
storage conditions. |
|
8 |
EXPOSURE CONTROLS / PERSONAL PROTECTION
Components
with workplace control parameters
Components |
CAS-Nr. |
Control
parameters |
ETHANOL |
64-17-5 |
1.900
mg/m3; 1.000 ppm; Update: 2001; Basis: EH40 OES; List:
Time Weighted Average (TWA):
Engineering measures
Use only in an area equipped with safety
shower.
Eye wash bottle with pure water.
If the formation of aerosol/mist cannot be excluded, ensure effective
exhaust ventilation.
in the working area.
Personal protective equipment
Respiratory
protection: |
When
workers are facing concentrations above the exposure limit, they must
use appropriate certified respirators.
|
Hand protection: |
solvent-resistant gloves
Advise: |
Short time contact |
Material: |
polyvinylchloride |
Minimum break through time: |
60 min |
Glove thickness: |
0,5 mm |
Advise: |
Prolonged contact |
Material: |
butyl-rubber |
Minimum break through time: |
> 480 min |
Glove thickness: |
0,5 mm |
|
Eye protection: |
safety glasses with
side-shields
|
Hygiene measures: |
Handle in accordance with
good industrial hygiene and safety practice.
Avoid contact with the skin and the eyes.
Wash hands before breaks and at the end of workday.
When using, do not eat, drink or smoke.
|
|
|
9 |
PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form: |
liquid |
Colour: |
Translucent |
Odour: |
faint odour |
Safety data
Boiling point/range:
|
ca. 78,5 °C |
Flash point: |
ca.16 °C |
Autoignition temperature: |
371°C |
Lower explosion limit: |
ca. 3,5 %(V) |
Upper explosion limit: |
ca. 19 %(V) |
Density: |
ca. 0,950 g/cm3 at 25°C |
Miscibility with water: |
non miscible (< 10%) |
|
10 |
STABILITY AND REACTIVITY
Thermal decomposition: |
Note: No decomposition if stored and
applied as directed. |
Further information: |
Apply
the following regulations and datasheets of the German BG Chemie.:
M 050‚ Handling harmful substances’;
M053‚ General industrial protective measures for handling dangerous
substances’.
No dangerous reaction if used as recommended. |
|
11 |
TOXICOLOGICAL INFORMATION
Human experience: |
Increased liver weights were recorded in
rats exposed repeatedly to Octamethylcyclotetrasiloxane by inhalation
or oral administration. No other liver changes were observed. Further
studies on rabbits and guinea pigs showed no effect in the liver.
In range finding studies Octamethylcyclotetrasiloxane affected
reproduction of laboratory animals exposed to high vapour
concentrations of 700 ppm, but not in lower concentrations, while
effects on maternal animals were already seen with 300 ppm and higher
concentrations. The significance of these findings to humans is
doubtful. In developmental studies in which rats and rabbits were
exposed to Octamethylcyclotetrasiloxane by vapour
inhalations of high concentrations up to 700 ppm and 500 ppm
respectively, no teratogenic effects (no malformations were observed).
|
|
12 |
ECOLOGICAL
INFORMATION
Additional ecological information: |
Ecotoxicological data for this products is
not available. |
|
13 |
DISPOSAL CONSIDERATIONS
Product: |
According to local regulations, can be
taken to an appropriate incinerator equipped with exhaust gas cleaning.
|
Contaminated
packaging: |
Dispose
of as unused product. |
|
14 |
TRANSPORT INFORMATION
Land
transport
ADR: |
UN-Nr. |
1993 |
|
Class
|
3
|
|
Packaging
group |
II
|
|
Classification
Code |
F1
|
|
Risk
No. |
33
|
|
ADR/RID-Labels
|
3
|
|
Proper
shipping name |
FLAMMABLE
LIQUID; N.O.S. |
|
Contains |
ETHANOL
|
RID: |
UN-Nr. |
1993 |
|
Class
|
3
|
|
Packaging
group |
II
|
|
Classification
Code |
F1
|
|
Risk
No. |
33
|
|
ADR/RID-Labels
|
3
|
|
Proper
shipping name |
FLAMMABLE
LIQUID; N.O.S. |
|
Contains |
ETHANOL
|
Inland waterway transport
ADNR: |
UN-Nr. |
1993 |
|
Class
|
3
|
|
Packaging
group |
II
|
|
Classification
Code |
F1
|
|
Risk
No. |
33
|
|
ADR/RID-Labels
|
3
|
|
Proper
shipping name |
FLAMMABLE
LIQUID; N.O.S. |
|
Contains |
ETHANOL
|
Sea
transport
IMDG: |
UN-Nr. |
1993 |
|
Class
|
3
|
|
Packaging
group |
II
|
|
IMO-Labels
|
3
|
|
EmS
|
3-07
|
|
Proper
shipping name |
FLAMMABLE
LIQUID; N.O.S. |
|
Contains |
ETHANOL
|
Air
transport
ICAO/IATA: |
UN-Nr. |
1993 |
|
Class
|
3
|
|
Packaging
group |
II
|
|
ICAO-Labels
|
3
|
|
Proper
shipping name |
FLAMMABLE
LIQUID; N.O.S. |
|
Contains |
ETHANOL
|
|
15 |
REGULATORY
INFORMATION
Labelling
according to EEC Directive:
Labelling according to the German Dangerous Substances Regulations
Annex II Part 1
(preparations), and the corresponding EU-Directives.
Hazardous components which must be listed on the label:
|
Octamethylcyclotetrasiloxane
|
Symbol(s):
|
Xn
|
Harmful
|
|
F
|
Highly flammable
|
R-phrase(s):
|
R11 |
Highly flammable
|
|
R53
|
May cause long-term
adverse effects in the aquatic environment.
|
|
R62
|
Possible risk of impaired
fertility.
|
S- phrase(s):
|
S 9
|
Keep container in a
well-ventilated place.
|
|
S 16
|
Keep away from sources of
ignition.- No smoking.
|
|
S 36/37
|
Wear suitable protective
clothing and gloves.
|
|
16 |
OTHER INFORMATION
Further
Information
R-phrases, which are listed in sections 2 and 3:
R11
|
Highly flammable
|
R53
|
May cause long-term
adverse effects in the aquatic environment
|
R62 |
Possible risk of impaired
fertility.
|
The
information provided in this Safety Dat Sheet is correct to the best of
our knowledge
Information and belief at the date of its publication. The information
given is designed only as
guidance for safe handling, use, processing, storage, transportation,
disposal and release and is
not to be considered a warranty or quality specification. The
information relates only to the specific
material designated and may not be valid for such material used in
combination with any other
materials or in any process, unless specified in the text.
Our ROHS Report
-
ROHS.pdf
Our
Non-Toxic Cert
-
Non-toxic.pdf
|